1
6
Getting Started
6.1
Connecting Electronic Components
Procedure
CAUTION Improper connection may damage the device! If the
t
device is connected using electronic components, e.g. printer, PC:
The device must be disconnected from the power supply. Ensure that
the device is disconnected from the power supply.
Connect the device using electronic components (see electronic
t
components instructions).
6.2
Installing the AC Adapter
Procedure
Plug the DC supply cable of the AC adapter into the device's "power
t
supply" (1) connection socket and tighten the threaded fitting.
Connect the power supply cable to the AC adapter connection.
t
Getting Started
Operating Instructions Cubis
MCE
31
®