Getting Started; Installing The Power Supply Unit; Assembling The Power Supply Unit; Dismantling The Power Plug Adapter - Sartorius Entris II Advanced Line BCA623-1S Operating Instructions Manual

Getting Started

6 Getting Started
6 . 1 Installing the Power Supply
Unit
6 . 1 . 1

Assembling the Power Supply Unit

Item number on Power supply unit YEPS01-
packaging 15VOW with connection cable
and country-specific power plug
adapters (packed in PE bag with
printed country identification,
e.g. EU)
YEPS01-PS8 USA and Japan (US+JP), Europe
and Russia (EU+RU), Great Britain
(UK), India (IN), South Africa (ZA),
Australia (AU), China (CN)
YEPS01-PS9 Argentina (AR), Brazil (BR), Korea
(KR)
YEPS01-PS10 China (CN)
Procedure
Push the power plug adapter as far as you can until it
t
clicks into place .
Check whether the power plug adapter is securely
t
locked in place by pulling it gently .
If the power plug adapter does not move: It is locked
y
in place .
36 Entris II Advanced Line Operating Instructions
®
Select the country-
t
specific power plug
adapter . The power plug
adapter must be
suitable for use with the
wall outlet at the
installation site .
Insert the power plug
t
adapter into the power
supply unit . The grooved
button must be facing
upwards .
6 . 1 .2

Dismantling the Power Plug Adapter

Procedure
6 .2

Connecting the Power Supply

Procedure
WARNING Severe injuries caused by using
t
defective power supply cables! Check the power
supply cable for damage, e .g ., cracks in the insulation .
If required: Contact Sartorius Service .
t
Check whether the country-specific power plug
t
matches the power connections at the installation
site .
If required: Replace the country-specific power
t
plug adapter .
NOTICE Damage to the device due to excessive
t
input voltage! Check whether the voltage
specifications on the manufacturer's ID label match
those of the power supply at the installation site .
If the input voltage is too high: Do not connect
t
the device to the power supply .
Contact Sartorius Service .
t
Connect the plug to the "Power Supply" connection .
t
Connect the mains plug to the wall outlet (mains
t
voltage) at the installation site .
Press the grooved
t
button from above and
pull back on the power
plug adapter .
Push the power plug
t
adapter out of the
power supply unit and
remove it .