Table of Contents
Advertisement
（3）Use two pieces of M4 screws and fasten the bracket to the rear surface of the bottom beam.
Description:
1. During the above-mentioned installation process, if the deviation between the cabinet and the screw
position of the connecting block is too large to be fixed, there is need to loosen the two fixing screws of
the connecting block and the mobile bracket in Page 25-Step 4, so that the connecting block and the
surrounding cabinets can be connected normally, and then tighten the above-mentioned screws.
2. Due to different packaging forms, the products packaged in the integrated flight case are divided into
two parts, i.e. left and right, because the display box is assembled in advance, and the installation
method is basically the same.
LED All-In-One User Manual
34
Advertisement
Table of Contents
