Hisense HAIO138 User Manual page 44

4. Bottom Beam Assembly
(1) Take out the already-assembled bottom beam, remove the 13 fixing screws on the ground side,
and remove the front cover (left cover and right cover).
(2) Place the bottom beam under the already-assembled display unit cabinet, and respectively fix the
cabinet at the bottom with the bottom beam by use of 12 pieces of M6X16 positioning screws.
(3) Install the side front shell and front cover and assemble the LED module according to the
instructions on page 31 and subsequent relevant pages of the Manual.
Note:
For the integrated packaging of non-flight cases, please install them in sequence according to the
installation sequence specified in Page 27 of the Manual, and adjust the stitching accuracy according
to the instructions before locking.
39
LED All-In-One User Manual