Hisense HAIO138 User Manual page 46

（5）Erect the mobile bracket, and fix 30 fixing screws tightly after checking that there are no
abnormalities
in the trolley.
M8 fixing screws
and gaskets (30
in total)
（6）Use 2 pieces of screws M6×16 to fix on the cross beam according to the direction shown
in the Figure, and fix the connecting block (in another storage box) with a total of 12 connecting
blocks and 24 screws at intervals as shown in the Figure.
Note: During the fixing process, the connecting block is in a natural drooping state. After the
fixation is completed, the screw head sinks into the groove of the connecting block, and the
upper and lower planes of the connecting block shall be basically flush with the upper and
lower planes of the cross beam.
Columns on both sides
Screw (M6×16)×2
41
Connecting block
LED All-In-One User Manual