Table of Contents
Advertisement
Engineering Mode
Press STOP and then speed up to enter the Engineering Mode. You can press Enter / Mode to switch
setup screens. The table below shows the sequence setup screens.
TR7000i
Engineering Function
Press and hold STOP and then Speed for 3 seconds to enter Engineering
Mode. The first screen show the software versions.
Press Enter
This for turning the Intelli-Guard on and off. Intelli-Guard
automatically pauses the unit if it detects the treadmill is not being walked
on. Press Speed / Incline UP / DOWN buttons to change between on and off
Press Enter to set up the units of measurement in metric (SI) or in English
(EN).
Press Speed / Incline UP / DOWN to change.
Press Enter for pause time
This allows you to set the amount of time the treadmill will be paused prior
to automatically resetting. The choices are 90,180, or 300 seconds as shown
in the time window.
Press Enter for Distance
This is the total distance the treadmill has been run in Miles or Kilometers
depending on what mode the treadmills is in.
Press Enter for Workout Time
This is the total number of hours the treadmill has been used.
Press Enter for Warm-Up option
Press Enter again to return to standby mode
TR8000i
Engineering Function
Press and hold STOP and then Speed for 3 seconds to enter
Engineering Mode. The first screen show the software versions.
Press Enter to set up the units of measurement in metric (SI) or in
English (EN).
Press Speed / Incline UP / DOWN to change.
Press Enter for pause time
This allows you to set the amount of time the treadmill will be
paused prior to automatically resetting. The choices are 90,180, or
300 seconds as shown in the time window.
Press Enter for Distance
This is the total distance the treadmill has been run in Miles or
Kilometers depending on what mode the treadmills is in.
Press Enter for Workout Time
This is the total number of hours the treadmill has been used.
Press Enter for Warm-Up option
Press Enter again to return to standby mode
32
Information viewed on screen
Engineering Mode
H = 002
F = C813
016
11.09
600
Intelli-Guard
On or Off
Select the units
EN or SI
Select the pause time
90, 180, or 300 seconds
Total Distance
0
000
Total Hours
0
000
On or Off
Information viewed on screen
Software Ver.
H = 0010
F = 0109
016
11.14
400
Select the units EN or SI
Select the pause time
90, 180, or 300 seconds
Total Distance
0
000
Total Hours
0
000
On or Off
Advertisement
Table of Contents
