Table of Contents
Advertisement
Innovative Features (continued)
Caution:
The Intelli-Guard feature will automatically be disengaged when the treadmill is operated at
speeds under 1.0 mph (1.6 kph). If the speed is within this parameter the step icon will flash. When the
icon flashes, the treadmill will not auto pause. If the speed is above 1.0 mph (1.6 kph) Intelli-Guard will not
activate until 20 steps are taken and counted.
Caution:
At 20 seconds the console will beep once per second for 5 seconds and then automatically
pause the treadmill. These beeps are a notice that the treadmill belt is about to stop. If for some reason you
are still on the treadmill when this occurs move your feet to the side rails and prepare for the belt to stop.
The Intelli-Guard feature does not replace the use of your safety key or using proper precaution in stopping
the treadmill when it is not in use.
Intelli-Step
(TR7000i only):
TM
senses the resistance on the running belt each time your foot strikes. There are several factors that will effect
the accuracy of this feature including your walking style, your weight, and your usage characteristics.
For example, the Intelli-Step feature will have a more difficult time picking up the steps of a light user and
especially a light user walking at an incline. The higher the incline the more difficult it is for the feature to
recognize steps. This may also be the base at lower speeds. In summary, the Intelli-Step is a great feature
for users interested in maintaining a step count walking or running program, but it is dependent on many
variables for accuracy and the accuracy of the count will depend on your individual characteristics as well as
variables related to the treadmills usage.
2 USB Ports:
The left port is for data transferring only. The right port is for charging your mobile devices,
including smartphones and tablets.
Don't remove the USB flash drive while the LED light is flashing red – you may lose your
workout information.
Energy Saving Mode:
dimly lit LED below the START button. This will cut power consumption to well under 0.1 watts. To wake from
Energy Saving Mode press and hold the START button for 3 to 5 seconds.
The treadmill comes with the Intelli-Step counting feature. This feature
The energy saving mode cuts all power to the treadmill with the exception of one
TR7000i/TR8000i
Treadmill
27
Advertisement
Table of Contents
