Related Manuals for LifeSpan TR8000i
Summary of Contents for LifeSpan TR8000i
-
Page 1: Welcome
TR7000i/TR8000i Treadmill Owner’s Manual For safe use and product knowledge, please completely read this product OWNER’S MANUAL... - Page 2 Remember that some kinds of service should only be performed by a qualified service technician. If service is required, please contact your authorized LifeSpan dealer. If a question or problem arises that cannot be answered by your dealer, please complete a customer support form at www.lifespanfitness.com/support/customer-service:...
-
Page 3: Table Of Contents
TR7000i/TR8000i Treadmill Table of Contents Welcome Specifications Warranty Information Important Safety Precautions Grounding and Power Requirements Assembly Instructions Display Console Overview Reading Your Heart Rate Operating Your Treadmill Innovative Features Cleaning and Maintenance Moving Your Treadmill Belt Tension and Aligning the Running Belt... -
Page 4: Specifications
Specifications (TR7000i) Large 6.5” back-lit LCD screen with scrolling alphanumeric messaging, program profile, showing workout progress, and simultaneous display Display: of all readouts. Three additional LED displays with readouts for time, speed, and incline Program name, date and time, speed, incline, distance, calories, steps, Readouts: heart rate, and pace Two heart rate control programs, and 42 programs grouped by... - Page 5 TR7000i/TR8000i Treadmill Specifications (TR8000i) Large 6.5” back-lit LCD screen with scrolling alphanumeric messaging, program profile, showing workout progress, and simultaneous display Display: of all readouts. Three additional LED displays with readouts for time, speed, and incline Program name, date and time, speed, incline, distance, calories, avg.
-
Page 6: Warranty Information
In order to insure our product warranty and to ensure the safe and efficient operation of your LifeSpan product, only authorized parts can be used. The warranty is void if any parts other than those provided by LifeSpan are used. -
Page 7: Important Safety Precautions
• Use this exercise product for its intended use as described in this Owner’s Manual. Do not use attachments that are not recommended by LifeSpan. • Do not leave your treadmill running while not in use. - Page 8 Children and Pets • Keep children from playing on your treadmill at all times. • When in use children and pets should be kept at least 10 feet (3m) away. • This appliance can be used by children ages 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Page 9: Grounding And Power Requirements
Treadmill Grounding and Power Requirements LifeSpan equipment must be grounded. Improper connection of the equipment’s grounding conductor can result in the risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the product or use a ground plug adapter to adapt to a non-grounded outlet. -
Page 10: Assembly Instructions
Assembly Instructions At LifeSpan we strive to make our equipment easy to assemble and start using. Parts that can be pre-assembled are always assembled and tested on the production line. Prior to starting the assembly process take all of the parts out of the box, remove plastic bags and lay them out on the floor to become familiar with the components. - Page 11 TR7000i/TR8000i Treadmill Step 1: Unpacking Treadmill A. Cut packaging straps and remove. B. Remove the box top. C. Remove small parts and packaging material and unwrap parts. D. Cut corners of the bottom box and remove all packaging material to begin assembly. The treadmill can be assembled in the box.
- Page 12 Step 3: Support Post Assembly A. Remove the three bolts (14) and washers (15) from the bottom of the left upright (4). B. Place the U shaped bracket on the bottom of the support post onto the main frame of the unit. Align the three holes in the bracket with the holes in the frame.
- Page 13 TR7000i/TR8000i Treadmill Step 4: Handlebar Set A. Hold the handlebar set (7) above the upright posts (4 and 5). Feed the cable (16) from the right support post (5) through the square hole on the right side of the handlebar set.
- Page 14 Step 5: Attach Console Set A. Remove the two screws (23) from the access panel (9) and four screws (22) from the back of the console (10). B. Place the console (10) face down on the handlebar set so the bottom of the console is just in front of the wires coming from the console mount area.
- Page 15 TR7000i/TR8000i Treadmill Step 5: (Continued) H. Attach the access panel (9) using the two screws (23) removed in step 5-A. Step 6: Attach Accessory Trays A. Remove the screw (25) from the bottom of each accessory tray (2 and 3).
- Page 16 Step 7: Medical Handlebar (optional) (If not attaching the medical handlebars skip to step 8) Un-package the Handlebars A. Open carton, remove and un-package all components. B. Check to be sure all components are present. The carton contains 1 left handlebar, 1 right handlebar, and a hardware kit.
- Page 17 TR7000i/TR8000i Treadmill 3. Install the Left and Right Handlebars A. Slide the new left handlebar end cap (3) onto the left handlebar (4) and the right end cap (5) onto the right handlebar (6). (FIG. 1) Note: The new left and right handlebar end caps are included in the hardware pack.
- Page 18 Step 8: Attach Lower Covers A. Remove the screw (24a) from each of the right (12) and left (8) support post covers. B. Remove screw (24b) from the inside of the motor compartment on both sides. C. Loosen the four screws (26) on the bottom of the frame. Two on each side. D.
- Page 19 TR7000i/TR8000i Treadmill Step 9: Roll the treadmill out of the box Carefully lift the treadmill up from the back and roll it out of the box. Step 10: Plug the power cord in and turn the treadmill on Power Socket...
-
Page 20: Display Console Overview
Display Console Overview Console Buttons The TR7000i/TR8000i includes our innovative Intelli-Key feature that will prompt you through console operations by using intelligent lights on the buttons that automatically flash when they need to be pressed to continue operations. energy Press &... - Page 21 The workout time elapsed or the workout time remaining. Incline: The level of belt incline ranging from 0 to 15 (TR7000i) or -3 to 12. (TR8000i) Speed: The speed you are traveling in miles per hour (this reading can be changed to kilometers by using the Engineering Mode).
-
Page 22: Reading Your Heart Rate
Reading Your Heart Rate Contact Heart Rate Sensors are built into the front handlebar of the TR7000i/TR8000i treadmill to monitor your heart rate during exercise. To use, grasp the sensors with a comfortable grip, with the palms of your hands placed over the sensors. -
Page 23: Operating Your Treadmill
5. To increase speed press the speed up button and the speed will increase up to 12.0 mph (20 kph) Manual Reverse program (TR8000i only) The TR8000i treadmill’s reverse walking program can provide multiple health benefits to users. Reverse ambulation, or walking backwards, has been found to increase flexibility of the hamstrings, reduce certain... - Page 24 Using Heart Rate Control Programs The TR7000i/TR8000i treadmill comes with two types of heart rate control programs – Constant and Interval and within each of these you can select either a Speed control option or an Incline control option. The constant Heart Rate Control (HRC) program requires that you set a heart rate that the display console will maintain throughout the workout and the interval requires that you set a LOW and a HIGH heart rate.
- Page 25 TR7000i/TR8000i Treadmill Operating Your Treadmill (continued) Note: To use the Heart Rate Control programs the treadmill needs to receive your heart rate throughout the entire workout either through using the grip pulse pads or a chest strap heart rate transmitter.
-
Page 26: Innovative Features
Operating Your Treadmill (continued) HRC – Interval (continued) 7. Set LOW Target Heart Rate – Set your LOW interval training rate using the UP / DOWN arrow keys. Press ENTER. 8. Press the START button to begin your workout. Fitness Test: This test is to evaluate the overall cardiovascular fitness of an adult. - Page 27 TR7000i/TR8000i Treadmill Innovative Features (continued) Caution: The Intelli-Guard feature will automatically be disengaged when the treadmill is operated at speeds under 1.0 mph (1.6 kph). If the speed is within this parameter the step icon will flash. When the icon flashes, the treadmill will not auto pause. If the speed is above 1.0 mph (1.6 kph) Intelli-Guard will not activate until 20 steps are taken and counted.
-
Page 28: Cleaning And Maintenance
Caution: Acidic cleaning detergents may damage painted or powder coated surfaces and should not be used. Such cleaners may void the LifeSpan warranty. Suggestion: It is always a good idea in a commercial setting to have someone on staff or a local service provider to perform periodic maintenance on the treadmill. -
Page 29: Moving Your Treadmill
Belt Lubrication Use only 100% silicone and avoid using aerosol silicone sprays which include additives and petroleum distillates. One ounce of silicone should be used for each application. LifeSpan offers 100% silicone lubricant that can be ordered at www.LifeSpanFitness.com. The walking belt should be lubricated every 50 hours of use or three months. -
Page 30: Belt Tension And Aligning The Running Belt
If you turn one side more than the other, the belt will start to drift to the side of the treadmill and will need to be aligned. DO NOT tighten more than 2 full turns on each side. If slippage still occurs, contact LifeSpan Customer Service. -
Page 31: Troubleshooting
At this point pulling and resetting the safety key should make the treadmill go back to a 0 incline level. If this does not work and all wire harnesses look good, contact LifeSpan customer support for service. -
Page 32: Engineering Mode
This is the total number of hours the treadmill has been used. Press Enter for Warm-Up option On or Off Press Enter again to return to standby mode TR8000i Engineering Function Information viewed on screen Press and hold STOP and then Speed for 3 seconds to enter Software Ver. -
Page 33: Test Mode
TR7000i/TR8000i Treadmill Test Mode TR7000i Test Function Information viewed on screen Press Stop and then Start and hold for 3 Hardware Testing seconds H = 002 F = C813 11.09 6.00 Press Enter All lights flashing and LED flashing Tests all LED’s and segments... - Page 34 TR7000i/TR8000i Treadmill LifeSpan Fitness 785 West 1700 South Salt Lake City, UT. 84104 Made in Taiwan Phone: 801.973.9993 www.LifeSpanFitness.com Version 2.0, June 2017NB...