Table of Contents
Advertisement
3. Install the Left and Right Handlebars
A. Slide the new left handlebar end cap (3) onto the left
handlebar (4) and the right end cap (5) onto the right
handlebar (6). (FIG. 1)
Note:
The new left and right handlebar end caps are
included in the hardware pack. The screw threads in the
end cap when installed on the handlebars should be facing
down. If not, the wrong end cap is on the wrong handlebar.
B. Slide the bottom of the left handlebar (4) up under the
treadmill lower frame and slide the top of the medical
handlebar into the treadmill handlebar frame. (FIG. 2)
C. Line the holes up in the treadmill handlebar frame with
the threads in the new end caps and loosely install the
two new M6*15 Allen head screws (7). (FIG 2)
D. Align the holes in the medical handlebar frame with
the threaded holes in the treadmill base frame and
loosely install the two M8*20 bolts (8), two M8 lock
washers (9) and two M8 washers (10). (FIG. 2)
E. Install the two inside frame M8*20 bolts (8), two M8
locks washers (9) and two M8 washers (10). (FIG. 3)
F. Repeat steps B-E for the right handlebar (6).
G. Tighten all hardware.
TR7000i/TR8000i
5
3
4
Figure 1
7
9
Figure 2
Figure 3
8
10
8
9
9
Treadmill
6
10
8
10
17
Advertisement
Table of Contents
