Table of Contents
Advertisement
NOTE: If the coding format of the video for the mainstream is MJPEG, the
video may be distorted at some resolutions.
•
Enable: Select "Enable" to enable the RTSP function.
RTSP Address
•
Port: Access port of the streaming media. The default number is 554.
•
RTSP Address: The RTSP address (unicast) format that can be used to
view the stream with a media player.
o
o
o
NOTE: When prompted to enter the RTSP stream login information, use the
direct camera login credentials (admin) to validate the connection.
Multicast Address
If the "Automatic Start" setting is enabled, the received multicast data should be
added to a VLC player to view video.
•
Multicast Address:
o
o
o
•
Audio: Having entered the main/sub stream in a VLC player, the video
and audio will play automatically.
•
Allow Anonymous Login: When enabled, there is no need to enter the
username and password to view the video when using RTSP.
5.2.8 UPNP
If this function is enabled, the camera can be identified by its assigned UPnP
device name and be quickly accessed through the LAN.
Go to Setup>Network>UPnP.
Enable UPNP and enter a UPnP name, then click the "Save" button to apply the
settings.
rtsp://Camera_IP:Port/profile1
1st Stream:
rtsp://Camera_IP:Port/profile2
2nd Stream:
rtsp://Camera_IP:Port/profile3
3rd Stream:
rtsp://IP address: rtsp
1st Stream:
port/profile1?transportmode=mcast
: rtsp://IP address: rtsp
2nd Stream
port/profile2?transportmode=mcast
rtsp://IP address: rtsp
3rd Stream:
port/profile3?transportmode=mcast
25
Advertisement
Table of Contents
