5.5.7 UPNP
If this function is enabled, the camera can be quickly accessed through the LAN.
Go to Config > Network > UPnP. Enable UPNP and then enter UPnP name.
5.5.8 Email
If you need to trigger an email when an alarm is triggered or the IP address is
changed, please set the Email here first.
Go to Config > Network > Email.
Sender Address: sender's e-mail address.
Username and password: sender's username and password.
Server Address: The SMTP IP address or hostname.
Select the secure connection type at the "Secure Connection" pull-d own list
according to what's required.
SMTP Port: The SMTP port.
Send Interval(S): The time interval of sending the email. For example, if it is set
35