Table of Contents
Advertisement
2.
Check the corresponding version checkbox (Enable SNMPv1, Enable SNMPv2, Enable
SNMPv3) according to the version of the SNMP software you download.
3.
Set the "Read SNMP Community", "Write SNMP Community", "Trap Address", "Trap Port"
and so on. Please make sure the settings are the same as that of your SNMP software.
Note: Please use the different version in accordance with the security level you required. The
higher the version is, the higher the level of the security is.
6.5.6 RTSP
Go to Config Network RTSP.
1.
Select "Enable".
2.
RTSP Port: Access port of the streaming media. The default number is 554.
3.
RTSP Address: The RTSP address you need to input in the media player.
4.
Check "Allow anonymous login...".
6.5.7 UPNP
If you enable this function, you can quickly access the camera via LAN and you don't need
to configure the port mapping when the camera is connected to the WAN via the router.
Go to Config Network UPnP. Enable UPNP and then input UPnP name.
After you enable it and set the UPnP name, you will see the UPnP name by clicking "Network"
on the desktop of your computer which is in the same local area network. Then double click
this name to access the camera quickly.
31
Advertisement
Table of Contents
