Table of Contents
Advertisement
sending notifications.
•
Username: Enter the username or e-mail address used to log in to the
e-mail account.
•
Password: Enter the password used to log in to the e-mail account.
•
Server Address: Enter the IP address to the server if routing through a
server.
•
Secure Connection: Select the preferred method of encryption.
•
SMTP Port: Enter the SMTP port of the e-mail service.
•
Send Interval(S): Set the time interval of how frequently an e-mail can
be sent. For example, if set to 60 seconds and multiple motion
detection alarms are triggered within 60 seconds, they will be
considered as only one alarm event and only one email notification will
be sent. If one motion alarm event is triggered and then another motion
detection alarm event is triggered after 60 seconds, two separate e-
mail notifications will be sent. If multiple, separate alarms have been
triggered simultaneously, multiple notifications will be sent separately.
o
•
Recipient Address: Enter the destination e-mail address that will
receive the notifications.
5.2.10
FTP
Set up an FTP server configuration to send snapshot images when an event
alarm has been triggered. Snapshots will then be uploaded to the designated
FTP server, depending on the event rule.
Go to Setup>Network >FTP.
Click the "Test" button to send a test e-mail after configuring
the settings.
27
Advertisement
Table of Contents
