Table of Contents
Advertisement
5.2 Network Configuration
5.2.1 IPv4 and IPv6
Go to Setup>Network>TCP/IP interface as shown below.
Use either IPv4 or IPv6 network addressing to configure the network
connection for the camera.
•
Obtain an IP address automatically: Obtain an IP address
automatically by DHCP from a DHCP network devices.
•
Use the following IP address: Manually assign an IP address, subnet
mask, gateway and DNS server preferences for the camera.
5.2.2 Port
Go to Setup>Network>Port interface as shown below.
Configure the HTTP port, Data port and RTSP port settings of the camera.
o
Test: Click the Test button to check the local network
for availability of a manually entered IP address.
19
Advertisement
Table of Contents
