Digital Watchdog DWC-VSDG04Mi User Manual page 8

6. Mount the camera using the included screws and anchors.
7. Adjust the camera's tilt and angle by loosening the tilt screw at the base of the
camera with a flathead screwdriver. Tighten the screw when done.
8. Assemble the dome cover over the camera body. Be careful not to alter the
direction of the camera module when placing the dome over the camera.
9. Remove the protective film from the dome. Softly wipe the dome with lens tissue
or a microfiber cloth with ethanol to remove any dust or smudges left from the
installation process.
Rubber Plug
3