Table of Contents
Advertisement
•
www.dydns.com
•
www.no-ip.com
3.
Visit the selected Service Type's website and register a domain
name.
4.
Enter the username, password and domain for the registered DDNS
configuration.
5.
Click the "Save" button to apply the settings.
5.2.5 SNMP
Use the SNMP function to remotely monitor camera status, parameters, alarm
information or to remotely manage the camera.
To configure SNMP:
1.
Go to Setup>Network>SNMP.
2.
Before using SNMP, please install an SNMP management tool and set
the parameters of the SNMP, such as SNMP port and trap address
information.
22
Advertisement
Table of Contents
