Table of Contents
Advertisement
5.1.5 Privacy Mask
Go to Setup>Camera>Privacy Mask interface as shown below.
Create a virtual mask to overlay and obscure selected areas of the camera
display. A maximum of four (4) privacy mask zones can be set at a time.
To set up a privacy mask:
1.
Check the 'Enable' box to allow the mask to allow the mask to overlay
the live display.
2.
Click the "Draw Area" button and use the mouse to draw the privacy
mask area.
3.
Click the "Save" button to apply the settings.
4.
Verify that the masked area appears in live view.
Click the "Clear" button to delete the privacy mask areas.
15
Advertisement
Table of Contents
