Upnp - Digital Watchdog MEGApix DWC-MT95WW28TW User Manual

To use RTPM, check "Enable" and configure the following:
Stream Type: Select the video stream that will be sent to the third-party host.
Reconnect After Timeout: If the connection is lost between the camera and the
host, the camera will automatically attempt to reconnect with the host after the
set amount of time (seconds)
Server Address: Enter the third-party server address to which the stream data
will be sent.
Connection Status: Click "Save" to apply the changes then click "Refresh" to
view the connection status.

5.2.9 UPNP

If this function is enabled, the camera can be quickly accessed through the LAN.
Go to Setup>Network>UPnP interface as shown below.
To use UPnP, enable UPNP and enter the UPnP name.
Click "Save" to apply the changes.
27