Snmp Settings - Digital Watchdog MEGApix Flex DWC-PVX16W2 User Manual

Setup - Network Setup

SNMP Settings

SNMPv1/SNMPv2 - Select the SNMPv1/SNMPv2 option and type the names of Read community and Write community.
SNMP trap can be used to check periodically for operational thresholds or failures that are defined in the MIB.
SNMP Trap - SNMP trap can be enable or disable.
SNMPv3 contains cryptographic security, a higher security level, which allows you to set the Authentication password and the Encryption
password.
Mode - Select the either Read or Read/Write mode.
Activation - It can be enable or disable selected mode.
Read/Write name - Define Read name and Write name.
Security Level - Select one of no auth, no priv/auth , no priv/auth, priv
Authentication Algorithm - Select MD5 or SHA as the authentication method.
Authentication Password - The Authentication Password is an encryption for authentication and they are at least 8 digits and up to
30 digits allowed.
Private-Key Algorithm - Select DES or AES as the encryption algorithm.
Private-Key Password - Information protection password is a private encryption and they are at least 8 digits and up to 30 digits
allowed.
Click 'Apply' to make above setting effective.
46