Unpacking; Installing A Single Ups - Huawei UPS5000-A User Manual

UPS5000-A-(400 kVA-600 kVA)
User Manual (60 kVA, PF=0.9)

3.1.4 Unpacking

Context
● Only trained personnel are allowed to move the UPS. Use a forklift to transport
● To prevent the UPS from falling over, secure it to an electric forklift using ropes
● Move the UPS with caution to avoid bumping or toppling, which may damage
● If the UPS installation environment is in poor condition and the UPS needs to
Procedure
Step 1 Use a forklift to transport the UPS to the installation position.
Step 2 Unpack the UPS.
Step 3 After confirming that the UPS is intact, remove the bolts that secure the UPS to
the pallet and remove the UPS from the pallet.
Figure 3-4 Removing the pallet from the UPS
----End

3.2 Installing a Single UPS

Issue 06 (2022-01-27)
NO TICE
the UPS case secured to a wooden pallet to the installation position.
before moving it.
the UPS. After placing the UPS in the installation position, unpack it carefully to
prevent scratches. Keep the UPS steady during unpacking.
be stored for a long time after it is unpacked, take measures to prevent dust. It
is recommended that the UPS be wrapped with the original plastic packing.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
48