Huawei UPS5000-E User Manual page 170

UPS5000-E-(400 kVA-800 kVA)
User Manual (50 kVA Power Modules)
Figure 4-2 Documentation QR code on the cabinet
(1) Documentation QR code
Figure 4-3 About
(1) Authentication code
Step 2 Choose System Status > Runn. Info. > Wireless Module on the LCD. Confirm that
the 4G module dial-up is successful and check the signal strength.
Step 3 Connect the device on the NetEco app.
----End
4G Module Access Scenario (WebUI)
Step 1 Set wireless module parameters.
Choose Monitoring > Wireless Module > Running Parameter on the WebUI. Set
Mobile data to Enable and set operator parameters based on site requirements.
Step 2 Check the running status of the wireless module.
Choose Monitoring > Wireless Module > Running Information on the WebUI.
Check the 4G module running status, confirm that the 4G module dial-up is
successful, and check the signal strength.
Issue 17 (2023-07-10) Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Single UPS Commissioning
162