Editing Nac Alarm Groups - Simplex Foundation Series Operation Manual

Fire alarm control unit

Table of Contents

9.2.3

Editing NAC alarm groups

With alarm groups, you can program selective signaling. Assign the NAC an alarm group number from 1 to 99. Assign the same alarm

group number to the initiating devices that you want to control the NAC. Each NAC can be in up to three groups.

To edit an NAC alarm group, complete the following steps:

See

Programming NACs

Press ENTER and then press the UP and DOWN keys until [Alarm Groups] is displayed. Then press ENTER. The control unit

displays the following:

ALARM GROUPS

[99] 00 00

Use the UP and DOWN keys to scroll the number in the brackets. Use the RIGHT and LEFT keys to move between the alarm

groups. Press ENTER when all the values are set correctly.

When NAC programming is complete, press ESC key until the control unit displays the following:

[Cont] Dscrd Save

Select [Save] and press ENTER to save the configuration.

page 27

and repeat steps 1 to 6.

2008 Foundation Series Fire Alarm Control Unit Operation Guide

579-1401 Rev A

Table of Contents

Do you have a question about the Foundation Series and is the answer not in the manual?