Simplex 4100-6069 Manual

UL, ULC, CSFM Listed*
Features
Panel mounted modules provides fire alarm
system status using the ASHRAE BACnet
building automation communication protocol
BACnet (Building Automation Control Network)
protocol reference:
 Communications are via BACnet IP (internet protocol)
 Reference: ANSI/ASHRAE Standard 135
Connections:
 To fire alarm system via RS-232 port B, configured
for Computer Port Protocol (see page 3 for model
number reference per panel)
 Output port provides Ethernet LAN (local area
network) connection
BACpac Ethernet Module is pre-programmed:
 Module is pre-programmed with digital pseudo points
linked to BACnet objects
 Up to 1000 status changes (monitor point status) can
be recognized from the fire alarm control panel
®
Compatible Simplex fire alarm control panels:
 4100ES and 4100U Series fire alarm control panels
and Network Display Units (NDU)
 4010ES Series fire alarm control panels
 Installed legacy Models 4100/4100+ and 4120 Series
fire alarm control panels and NDU (software revision
updating may be required
Listings reference:
 UL listed to Standard 864
 ULC listed to Standard S527
Description
The BACpac Ethernet module provides a supplementary
communications interface that converts computer terminal
information from a compatible Simplex fire alarm control
panel into the building automation protocol of BACnet.
With this module, status information from the fire alarm
control panel can be provided to other components of the
building automation network with the detail and
information format required.
Providing this information allows other systems to
properly respond to fire alarm system activity in addition
to the primary fire alarm response that is under the control
of the fire alarm control panel.
Fire Control Panels
BACpac Ethernet Portal Modules
Model 4100-6069 and 4010-9915
Facility LAN
LAN Connected BACnet System Controllers
FIRE ALARM FIRE ALARM
PULL DOWN PULL DOWN
Fire alarm
initiating devices
Fire Control
Simplex Fire Alarm
Fire Alarm
Network
CONTROL F I RE A LARM
1 2 : 02 : 15p m ** SY ST EM IS NORMAL * * Mo n 8- M a r-99
AL ARM F I R E SUP ERVI SO R SYS TEM Y E TRO U BL SYST EM SI L ENC ED ALAR M A C P O W ER
A CK AL ARM V SU P AC K ACK TR O U BLE SI L E N CE ALAR M R ES E SYS TEM
T C AUTION
S E RV I CI N G P O W E R B E F ORE DI S C ONNE CT
Typical Building Automation LAN with
Simplex Fire Alarm Control Panel and BACpac Portal
(shown with 4100ES panel for reference)
This document is a summary of the flexibility available
with BACnet communications. Please contact your local
Simplex product supplier for further information
concerning your specific application.
*
This product has been approved by the California State Fire Marshal (CSFM) pursuant to
Section 13144.1 of the California Health and Safety Code. See CSFM Listing
7165-0026:0251 (4100 Series) or 7165-0026:0369 (4010ES) for allowable values and/or
conditions concerning material presented in this document. It is subject to re-examination,
revision, and possible cancellation. This product was not approved by FM, or accepted by
MEA (NYC) as of document revision date. Additional listings may be applicable; contact
your local Simplex product supplier for the latest status. Listings and approvals under
Simplex Time Recorder Co. are the property of Tyco Fire Protection Products.
System
Workstation
ALARM
Facility LAN
ALARM
4100-6069 BACpac
Ethernet Module
Control Panel
Fire Alarm System
S4100-0051-3 9/2012