Accepting Defaults - Simplex Foundation Series Operation Manual

7.4

Accepting defaults

This option restores only system options and access levels to their original factory default configuration.
Press MENU.
1.
2. Press UP or DOWN until you reach the [Auto-Program] menu item.
3. Press ENTER. The control unit displays the following:
FIRE ALARM
SUSPENDED
After a few seconds, the control unit displays the following:
<ENTER> to PROGRAM
<EXIT> to CANCEL
4. Press ENTER and press UP or DOWN until [ACCEPT DEFAULT] is displayed.
5. Press ENTER. A warning message appears indicating that this action deletes the current configuration. The LCD displays the
message:
Default Restored
The control unit displays the following:
<ENTER> to PROGRAM
<EXIT> to CANCEL
6. Press the ESC key and the control unit displays the following:
JOB HAS CHANGED
[Cont] Dscrd Save
Select [Save] and press Enter to save the configuration.
7.
page 16
2008 Foundation Series Fire Alarm Control Unit Operation Guide
579-1401 Rev A