Factory reset
To restore the factory default settings:
1. Navigate to Factory Reset and press ENTER/OK.
2. When prompted, press ENTER/OK to confirm your choice, or press EXIT to cancel.
Operating Guide
Using the projector
Model Name
Serial Number
Software Version 1 MD03-SE10-FE09
Factory Reset
Warning
All user settings will be lost
Press OK to confirm
Press Exit to cancel
Thermal Status
Factory Reset
Digital Projection Ltd. Titan Laser WUXGA
Information
TitanLaser 33000 4K-UHD
X000XXXXX0000
►
Notes
Factory reset does not
reset the Network settings,
or High Altitude mode
Rev B September 2019
page 97