2.4
Remote Power & Reset Settings
The UNO-137 V2 supports remote power and reset functions through the DI connec-
tor with the switch setting (SW8) on the motherboard. The default setting is for DI6/
DI7 functionality. If you want to configure the UNO-137 for remote control functions,
configure SW8- Bit 2 to "on", then the DI6 can be used for remote power settings, and
the DI7 can be used for remote reset setting.
Table 2.1: Remote Power/On & Reset Settings
SW2 Default (Pin 1-Pin 2)
Note: no function if poses is on Pin 2
Description
DI Function for DI6/DI7 (Default)
Remote Setting Function
2.5
BIOS Setting
With the BIOS setup program, you can modify the BIOS settings and control the spe-
cial features of your computer. The setup program uses a number of menus for mak-
ing changes and turning special features on or off.
Press the "ESC" key upon the first boot up to enter the BIOS setup screen. Then,
press the "Delete" key during the Power On Self Test (POST) process to enter the
BIOS setup screen, otherwise the system will continue the POST process.
(Please refer to User Manual- Appendix A.11/A.12 for more settings.
UNO-137 V2 User Manual
Instructions
SW2
Pin1-Pin 2
Pin 2-Pin 3
16