PCI Express Configuration
M.2 E-Key
–
Control the PCI Express root port.
–
ASPM
Set the ASPM level: force L0s-force all links to L0s state. Auto-BIOS auto
configure. DISABLE-disables ASPM.
L1 Substrates
–
PCI Express L1 substrate settings.
–
Multi-VC
Enable/Disable multi virtual channel.
SATA Configuration
–
SATA Controller(s)
Enable/Disable SATA Device.
SATA Mode Selection
–
Determines how SATA controller(s) operate.
–
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
–
SATA Controller Speed
Indicates the maximum speed the SATA controller can support.
UNO-137 V2 User Manual
Figure A.31 PCH-IO configuration – 4
62