A.8
COM Port RS232/422/485 Settings
The default setting for the COM port is RS-232. This can be changed to RS-422 or
RS-485 modes can be configured by adjusting switch on the motherboard.
A.8.1
RS232/422/485 Setting (SW1)
Table A.10: RS232/422/485 Setting (SW1)
SW1 Default
Description
Default
RS232 Mode
COM1
RS485 Mode
RS422 Mode
This switch is used to select RS232/422/485 mode settings
RS232 mode
Bit 1 ON
Bit 2,3,4,5,6,7,8,9,10 OFF
Bit 2,4,5 ON
Bit 1,3,6,7,8,9,10 OFF
Bit 1,2,4,5 ON
Bit 3,6,7,8,9,10 OFF
37
UNO-137 V2 User Manual