Power Connector (Dcin1); Lan: Ethernet Connector (Lan12) - Advantech UNO-137 V2 User Manual

A.1

Power Connector (DCIN1)

Table A.1: Power Connector Pin Assignments
Pin Signal
1 Power IN V+
2 Power IN V- (GND)
A.2

LAN: Ethernet Connector (LAN12)

Table A.2: Ethernet Connector Pin Assignments
RJ-45 Pin Signal
1 MDI0+
2 MDI0-
3 MDI1+
6 MDI1-
4 MDI2+
5 MDI2-
7 MDI3+
8 MDI3-
Table A.3: LED
Left LED
100/10 Link
Off
UNO-137 V2 User Manual
Description
10 V
DC
Description
In BASE-T: Media Dependent Interface[0]:

1000BASE-T: In MDI configuration, MDI[0]+/- corresponds

to BI_DA+/- and in MDI-X configuration MDI[0]+/- corre-
sponds to BI_DB+/-.
10BASE-T and 100BASE-TX: In MDI configuration,

MDI[0]+/- is used for the transmit pair and in MDIX config-
uration MDI[0]+/- is used for the receive pair.
In BASE-T: Media Dependent Interface[1]: 1000BASE-T:

In MDI configuration, MDI[1]+/- corresponds to BI_DB+/-
and in MDI-X configuration MDI[1]+/- corresponds to
BI_DA+/-.
10BASE-T and 100BASE-TX: In MDI configuration

MDI[1]+/- is used for the receive pair and in MDI-X config-
uration MDI[1]+/- is used for the transmit pair.
In BASE-T: Media Dependent Interface[3:2]: 1000BASE-T:

In MDI and in MDI-X configuration, MDI[2]+/- corresponds
to BI_DC+/- and MDI[3]+/ - corresponds to BI_DD+/-.
100BASE-TX: Unused.

10BASE-T: Unused.

1000 Link 2500 Link
Orange Green
30
- 36 V
DC
Right LED
Active
Green