Remote Power & Reset Settings; Bios Setting - Advantech UNO-137 User Manual

3.7 Remote Power & Reset Settings
UNO-137 supports remote power & reset functions through DI connector with the
switch setting (SW8) on the motherboard. The default setting is for DI6/DI7 function-
ality. If you want to configure UNO-137 for remote control functions, configure SW8-
Bit 2 to "on", then DI6 can be used for remote power settings, and DI7 can be used
for remote reset setting.
Table 3.1: Remote Power/On & Reset Settings
SW8 Default
Description Instruction
DI function
for DI6/ Bit 2 off
DI7(Default)
Remote Set-
Bit 2 on
ting Function
3.8

BIOS Setting

With the BIOS Setup program, you can modify BIOS settings and control the special
features of your computer. The Setup program uses a number of menus for making
changes and turning special features on or off.
Press the "ESC" key upon the first boot up to enter the BIOS setup screen, after then,
press the "Del" key during the Power On Self Test (POST) process to enter the BIOS
setup screen, otherwise the system will continue the POST process.
(Please refer to User Manual- Appendix A.11/ A.12 for more settings)
UNO-137 User Manual
SW8
34