2.3
M.2 Installation (Optional)
The UNO-137 V2 supports the installation of M.2 E-Key 2230 and M.2 B-Key 2242.
Please refer to The UNO-137 V2 Startup Manual for installation steps.
2.3.1
Antenna Installation
1.
Install the SMA connector of the antenna cable to the antenna hole.
2.
Connect the MHF of antenna cable with the module.
3.
Return the back cover and gently screw it into place.
4.
Assemble the antenna on the SMA connector of the antenna cable.
*Wireless module, antenna cable, and antennas are optional. Please contact Advan-
tech for further information.
UNO-137 V2 User Manual
10