ABB HiPerGuard MV UPS User Manual page 4

Target groups and required qualifications
The product presented in this manual is part of a CAT III/IV environment where voltages are present that
contain a potential hazard of electric shock and/or burn. For this reason, only personnel who have a
thorough knowledge of the MV UPS and the industrial environment and have obtained the required
qualification may handle, install, operate, or maintain the product.
The manual addresses personnel who are responsible for unpacking, transportation, installation,
operation, and maintenance of the MV UPS. The personnel shall carry out the listed tasks in a manner
that does not cause physical harm or danger, and that ensures the safe and reliable functioning of the
product.
Handling and Installation
Handling
The personnel shall be skilled and experienced in unpacking and transporting heavy equipment.
Mechanical installation
The personnel shall be qualified to prepare the installation site according to the site and equipment
requirements and to perform the installation accordingly.
Commissioning of the HiPerGuard must only be performed by qualified and
certified ABB personnel.
Electrical installation
The personnel shall have a sound knowledge of the relevant electrical codes and specifications covering
low and medium voltage equipment, be experienced with electrical wiring principles, and know the
electrical symbols typically used in wiring diagrams.
Operation
The personnel include all persons who operate the HiPerGuard from the Graphic Display Module (GDM).
Those people must know the functions of the GDM, be adequately trained for the MV UPS, and
understand its operation process.
Maintenance
The personnel include all persons who:
– Are qualified to carry out preventive and corrective maintenance on MV UPS as described in this
manual.
– Are thoroughly familiar with the product.
– Have a sound knowledge of the relevant electrical codes and specifications covering low and medium
voltage equipment.
– Are able to assess the hazards associated with the energy sources of the MV UPS system and act
correspondingly.
– Know the safe shutdown and grounding procedures for the MV UPS system.
– Are familiar and understand the instructions contained in the Service manual.
https://new.abb.com/ups/
ABO U T T H IS D O C UM E NT
4/104