Recd On Acct 1-3; Service - Sam4s NR-510B Operating And Programming Manual

RECD ON ACCT 1-3

RECD ON ACCT 1-3 Key Program Notes
Option
DESC
HALO
KEY DISABLE
UNDER MGR
CONTROL
COMPULSORY
VALIDATION

SERVICE

SERVICE Key Program Notes
Option
DESC
NON-ADD #
COMP
PRINT ON
RECEIPT
NEGATIVE
BALANCE IN
MGR CONTROL
CALCULATE TAX1-
4
COMPULSORY
VALIDATION
HARD CHECK
PRINTER PORT
(0-2)
SAM4S NR-500 Series Manual
Entry Description
Alpha You can program a unique descriptor. The default
numeric descriptors are RA 1-3.
24
character
7 digit You can limit errors by setting the maximum amount that
amount can be used with this function. "0" means that there is no
entry limit.
Y or N
Select Y to disable this function.
Y or N Select Y if you do not want the operator use this function in
REGISTER MODE. When selected, the function is
allowed only in the MANAGER MODE.
Y or N Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
Entry Description
Alpha You can program a unique descriptor. The default
numeric descriptor is SERVICE.
24
character
Y or N
Select Y if you wish to force the entry of a non-add number
(i.e. a tax exempt #) before the key is used
Y or N
Select N to not print on the receipt.
Y or N
Select Y if you do not want the operator to use this function
in REGISTER MODE. When selected, the function is
allowed only in the MANAGER MODE.
Y or N
Select Y to calculate and add the appropriate tax
automatically when finalized with this key.
Y or N
Choose Y to enforce validation if an optional printer with
validation capability is connected to an RS-232C port.
0-2 If you are using a hard check system, enter the RS232C port
number (1 or 2) where the optional guest check printer is
attached.
Program Mode Programming • 143