Sam4s NR-510B Operating And Programming Manual page 153

Option
ALLOW SALE WITH
ZERO STOCK
WARNING BELOW
MINIMUM STOCK
STOCK PROGRAM
BY PC/SD/USB
USE Z/P/S MODE
PASSWORD
PRINTER PAPER
SENSOR ACTIVE
RS-232C PORT
POWER ON
DISPLAY 4 LINE IN
REGISTER MODE
STORE NAME
DRAWER LIMIT
CHEQUE CHANGE
LIMIT
MACHINE NO.
SAM4S NR-500 Series Manual
Entry
Y or N
Y or N
ADD(+)
SUB(-)
REPLACE
Y or N
Y or N
Y or N
Y or N
8 Character
8 DIGIT
8 DIGIT
4 DIGIT
Description
When N, inventory PLUs cannot be sold when
stock reaches "0".
Select Y to display warning message if stock is
below than minimum stock counts.
Choose ADD(+), SUB(-) or REPLACE to
determine whether the quantity of inventory you
enter in the PLU stock program adds to existing
inventory quantity, or whether it replaces the
current inventory quantity.
Select Y to be password protected to provide
management restriction in CLOSING(Z),
PROGRAM(P), SERVICE(S) MODE.
A built in paper sensor determines whether paper is
currently loaded in the printer. If Y, operations
are not allowed without paper loaded. If N,
operations are allowed when paper is out.
Select Y to turn ON the RS-232C port power.
Select Y to display 4 items or N to display 1 item
in Register mode.
Stored files will be saved on SD/USB under a
folder with the store name. Do not include spaces
between the name.
You can set a limit for the drawer total. When
cash in drawer exceeds the limit you program here,
a warning will display on the screen. You must
press CLEAR to remove the warning and continue
operations. The warning will continue to appear
at the completion of every transaction with the
limit exceeded, until you use the PAID OUT
function to remove cash from the drawer.
Set the drawer limit to 0 to disable the drawer limit
warning.
Use this program to set the maximum amount of
cash that can be returned when a check is tendered
for an amount greater than the amount of the sale.
For example, if the check change limit is
the maximum amount that can be tendered into the
check key on a ￡ 5 .00 sale is
The machine number is printed on the register
receipt. Program a machine number so that any
receipt can be identified with the store or register
where the transaction took place.
Program Mode Programming • 153
￡ 1 0.00
￡ 1 5.00.