Table of Contents
Advertisement
Use the PC Utility to Convert the Image
See page on 103 for detail.
Copy the Images to an USB memory
The PC Utility will create two image files:
They will be located in your PC at:
C:\NR-500PC\Storename
Copy the mages to the following path on your USB memory:
USB\\NR-500\Storename\IMAGE
Important: In the path: C:\NR-500PC\Storename, the store name is the name you
have defined as the store in the PC Utility.
Note: You must use the same store name in the NR-500 Series ECR at "Store name"
of "SYSTEM" of the "Options Programming" Note that the default store name is
"STORE001".
Saving Images from an NR-500 Series to an USB memory
1. Insert the SD card in the register's USB slot.
2. Move to the SERVICE MODE.
3. From the Service Mode menu, select "7.PROGRAM BACKUP".
4. From the PROGRAM BACKUP menu select "2.USB".
5. From the USB menu select "4.IMAGE SAVE".
Loading the Images by USB memory
1. Insert the SD card in the register's USB slot.
2. Move to the SERVICE MODE.
3. From the Service Mode menu, select "7.PROGRAM BACKUP".
4. From the PROGRAM BACKUP menu select "2.USB".
5. From the USB menu select "5.IMAGE LOAD".
112 • Service Mode Programming
USERPRE.IMG
•
USERPOST.IMG
•
SAM4S NR-500 Series Manual
Advertisement
Table of Contents
