Recd On Acct 1-3 - Sam4s SPS-300 series Operator's Manual

DATATRAN TIP
Firmware versions supporting EMV provide a new DATATRAN TIP function key (key code
418) for TIP entry in register mode when using integrated payment. If your application is set for
"Fine Dining" you must place this function on the keyboard. The key is programmable for
manager control.
Datatran Tip Program Notes
DESC
UNDER MGR
CONTROL
SEND TO EFT
208 • Program Mode Programming
DTAN TIP PROGRAMMING
DESC : DTRAN TIP
UNDER MGR CONTROL
SEND TO EFT
Alphanumeric You can program a unique descriptor for each foreign
12 character currency. The default descriptor is DTRAN TIP.
Y or N Select Y if you do not want the operator to use this function
in REGISTER mode. When selected, the function is
allowed only in the X control lock position.
Y or N Select Y if the DataTran is connected.

N
Y
Sam4s SPS-300 OP Manual v1.35
Required
Setting