Sam4s NR-510B Operating And Programming Manual page 80

80 • Manager Mode (X Mode)
8. Select operator ADD, SUB or REPLACE.
ST OC K EN TR Y
OP ERA TO R: A DD (+)
AD D(+ )
9. Enter the stock quantity you wish to ADD/SUBTRACT/REPLACE, and press
CASH. Note that stock is kept in decimal units and you must enter new or
additional stock to two digits beyond the decimal. For example, type 1 0 0 0 to
enter ten units of inventory.
10. To program a additional PLUs repeat step 5 or 6, or press CLEAR key to
finalize.
SAM4S NR-500 Series Manual