Table of Contents
Advertisement
10 Use of equipment
10.1 User settings
Pump
Motor
10.2 Safety in production
Before commissioning, fill the cup with lubricant "T".
Note: the motor is wired in direct control. Start pressure
about 500 grams.
housings, ...) are set up for safe use of the equipment.
The manufacturer can not be held responsible in case of
bodily injury as well as breakdowns and / or damage of
the material resulting from the destruction, the occultation
or the total or partial removal of the protectors.
Guards
(motor
cover,
Use of equipment
coupling
guard,
53
Advertisement
Table of Contents
