Table of Contents
Advertisement
Filter
Orientation of the product
output
Tools needed
A
(A) By default, the filter (1) is installed to the right of the
pump (front view).
(B) and (C) It is possible to change the position of the
product output by first removing the 4 nuts and washers
to disconnect the fluid section part (on which the filter is
mounted) of the motor
Note: (B) possible if hopper is missing.
Attention: Support the fluid section well (Fluid
section weight: 11 kg / 24.25 lbs).
24
B
C
162
Advertisement
Table of Contents
