Safety instructions
Security devices
Danger of Pressure
Attention
Guards (motor cover, coupling guard, housings, ...) are set
up for safe use of the equipment.
The manufacturer can not be held responsible for any
bodily injury as well as failures and / or damage to the
equipment resulting from the destruction, the occultation or
the total or partial removal of the protectors.
Never exceed the maximum working pressures of the
equipment components.
Safety requires that a decompressed air shutoff valve be mounted on the
pump motor supply circuit to allow trapped air to escape when the supply
is shut off.
Without this precaution, the residual air from the engine may cause the
motor pump to operate and cause a serious accident.
Similarly, a product purge valve must be installed on the product circuit so
that it can be purged (after shutting off engine air and decompressing it)
before any intervention on the equipment. These valves should remain
closed for air and open for the product during the procedure.
10