Table of Contents
Advertisement
Filter
Reversing the direction of
the tank
Tools needed
A
C
(A) Remove the valve (1) from the filter with a 21 mm
spanner and the cap (2) using a BTR key of 8.
(B) Using a flat wrench of 27, rotate the filter by 180 °.
(C) Install the valve (1) at the other end of the filter by
turning it 180 °; replace the cap (2) at the top of the filter
with waterproof tube glue.
Note: This position increases the risk of paint stagnation in
the base.
27
21
B
D
8
Loctite 5772
164
Advertisement
Table of Contents
