Operating Limits; Power Output; Input Voltage - Xantrex Freedom HF 1000 Owner's Manual

Operating Limits

Power Output

Input Voltage

4–8
The Freedom HF can deliver up to 1000 watts
1800 watts (Freedom HF
applies to resistive loads such as incandescent lights.
The allowable Freedom HF
following table:
Operating
Condition
Normal
Optimum
Performance
Low Voltage Alarm
Low Voltage
Shutdown
High Voltage
Shutdown
1800) continuous power. The wattage rating
input voltage ranges are shown in the
Voltage Range Comment
11–15.0 V
12.0–13.0 V
11.0 V or less The low battery alarm beeps once
every two seconds and the display
shows fault code E05.
Less than The low battery alarm beeps every
10.5 V second and the display shows fault
code E01. The status LED turns red
and the display screen is turned OFF
within 30 seconds to protect the
battery from being over-discharged.
15.5 V or more The over-voltage alarm beeps every
second and the display shows fault
code E02 alternating with the battery
voltage. The status LED turns red and
the display screen is turned OFF
within 30 seconds to protect itself
from excessive input voltage.
Note: Although the
incorporates over-voltage protection,
it can still be damaged if input
voltage exceeds 16 V.
(Freedom HF 1000) or
Freedom HF
975-0390-01-01