Setting On Indoor Unit Pcb - Fujitsu AJ 126LELDH Series Design & Technical Manual

2-2. Setting on indoor unit PCB

Components related to function setting are located on the indoor unit main PCB.
¢ Components location
Related components location is differ depending on the type of the indoor unit as follows:
Type of PCB
Compact cassette, 4-way flow cassette, Low static pressure duct (Mini duct), Low static
Type 1 pressure duct (Slim duct)/Slim concealed floor, Low static pressure duct (High efficiency),
Medium static pressure duct, High static pressure duct, Floor/ceiling, Ceiling
Type 2 Wall mounted (ASA018, 024)
Type 3 3D flow cassette
Type 4 Circular flow cassette
Type 5 Wall mounted (ASA030, 034)
Type 6 Compact floor
Type 7 Wall mounted (ASA004, 007, 009, 012, 014, ASE004, 007, 009, 012, 014)
Type 8 One way flow cassette
• Type 1:
DIP switch
(Type B)
NOTE: SW1 may not be available depending on the models.
2-2. Setting on indoor unit PCB
SW1
DIP switch
(Type A)
SET2 SET1
Main PCB
- (07-74) -
Type of indoor unit
Rotary switch
(Type C)
SW604 SW605 SW606 SW607 SW608
SW601
DIP switch
(Type A)
SW PCB
SW602
Rotary switch
(Type D)
2. Function settings