Fujitsu AJ 126LELDH Series Design & Technical Manual page 890

2. Select the function number by pressing the SET TIME "<" button or SET TIME ">" button.
3. Select the setting number by pressing the SET TEMP. "
setting number indication flashes during number selection setting.
4. Confirm the setting by pressing the TIMER SET button. The data will be transferred to the in-
door unit.
• When the address data is properly set up on the indoor unit, the flashing of the number stops
and the set number will be displayed. (GOOD)
• When the address data is not set up correctly, "- -" is displayed. (ERROR) Back to the previ-
ous step and set up the indoor unit address data again.
RELATED LINKS
"Completion of setting mode"
"Function details" on page 07-108
2-5. Indoor unit (setting by UTY-RNK)
Example) Function number: 30; Setting number: 01
on page 07-31
- (07-94) -
Function number
" or the SET TEMP. "
Setting number
ERROR
GOOD
" button. The
2. Function settings