System Type Setting - Fujitsu AJ 126LELDH Series Design & Technical Manual

1-1. System type setting

Other than the units mentioned below, refer to
tion manual.
¢ Outdoor unit setting
<Step 1>
Refrigerant circuit address setting
↓
<Step 2>
Terminal resistor setting
↓
<Step 3>
Indoor unit connection check
↓
<Step 4>
Function setting
¢ Indoor unit setting
For the actual switch positions, refer to
<Step 1>
Refrigerant circuit address setting
↓
<Step 2>
Indoor unit address setting
↓
<Step 3>
Remote controller address setting
↓
<Step 4>
Function setting
1-1. System type setting
"Function settings"
Set the rotary switch REF AD x10 and x1.
For details of switch, refer to
4.
Set the DIP switch SET5-4.
For details of switch, refer to
page 07-63.
For details, refer to "Indoor unit connection check"
07-64.
"Function settings"
Set the rotary switch REF AD x10 and x1.
For details, refer to "Address setting"
Set the rotary switch IU AD x10 and x1.
For details, refer to "Address setting"
Set the rotary switch RC AD.
For details, refer to "Address setting"
- (07-2) -
on page 07-66 and the installa-
"Address setting" on page 07-
"Terminal resistor setting"
on page 07-66.
on page 07-4.
on page 07-4.
on page 07-4.
on
on page
1. System settings