System Setting; Indoor Unit Setting - Fujitsu AUXG22KVLA Design & Technical Manual

5. System setting

5-1. Indoor unit setting

Setting
Indoor unit
Set A
Primary/Secondary
Refrigerant circuit
Set B
address
Remote controller
Set C
address
NOTES:
• ◌: Setting is required.
• ●: By a case, setting is required.
• *: Set the remote controller address in the order of "00", "01", "02",..., "15". (Blank is not al-
lowed).
¢ Twin type
• Connection example 1
• Connection example 2
NOTE: (00) is factory setting.
5-1. Indoor unit setting
Setting range
◌ "00" or "01"
● "00" to "15"
◌ "00" to "15"*
<Twin>
Outdoor unit
Refrigerant pipe
Indoor unit
SetASetB SetC
(00)(00)(00)
<Twin>
Outdoor unit
Refrigerant pipe
Indoor unit
SetASetB SetC SetASetB SetC
01
(00)(00)(00) (00)
Wired remote controller
Refer to Chapter 8-8.
183. (Function number: 51)
Refer to Chapter 8-8.
183. (Function number: 02)
Refer to Chapter 8-8.
183. (DIP switch setting)
Junction box
Connection cable
SetASetB SetC
01 (00) 01
Remote controller cable
Wired remote controller
<Twin>
Junction box
Connection cable
SetASetB SetC SetASetB SetC
01
(00) 01 02 01 01 03
Remote controller cable
- 126 -
Setting method
"Function details" on page
"Function details" on page
"Function details" on page
5. System setting