Fujitsu AJ 126LELDH Series Design & Technical Manual page 808

00
00 00 00 01 00 02 00 03 00 04 00 05
0 0 0 0 0 0
R.C.line: 2 wire *1
2 wire type R.C. 2 wire type R.C.
1
* : Set the remote controller address "0" only.
Address is automatically assigned from Remote controller.
• Touch panel controller setting (Set G)
Before performing the initial setting, set the Touch panel controller address first. For details,
refer to the setting manual.
00 01 02 03
2
Touch panel controller (Max. 16) *
*: The sum total of the Touch panel controller, Central remote controller, Network converter for
Group remote controller, Modbus converter, and Network converter for LonWorks is a maxi-
mum of 16.
- (07-12) -
1-3. Manual address setting method 1. System settings