Fujitsu AJ 126LELDH Series Design & Technical Manual page 836

 Button name and function
Address code or function indicator on the remote controller is as shown in the figures below.
• For an outline of the address setting, refer to
• For the details of function number and setting number used for the function setting, refer to
tion details" on page 07-108.
• It does not matter whether the refrigerant circuit address or indoor unit address is set first. (The
method shown here sets the indoor unit address first.)
• During address setting mode, indoor unit reject the any operation command from remote con-
troller.
Function number
01: Indoor unit address
02: Refrigerant circuit address
Remote controller address
Remote controller address
setting number 00 to 15
FAN button
Each time this button is pressed,
the fan setting changes among
"Remote controller address,"
"Function number" and "Setting number."
Function number
01: Indoor unit address
02: Refrigerant circuit address
Remote controller address
Remote controller address
setting number 00 to 15
FAN button
Each time this button is pressed,
the fan setting changes among
"Remote controller address,"
"Function number" and "Setting number."
RELATED LINKS
"Indoor unit (setting by UTY-RSK, UTY-RHK)"
 Entering setting mode
Hold down the 3 buttons of SET TEMP. "
onds or longer. The setting mode will be activated.
1-4. Address setting by remote controller
"Address setting"
UTY-RSK* (With operation mode)
UTY-RHK* (Without operation mode)
on page 07-99
", SET TEMP. "
Initial display of setting mode
- (07-40) -
on page 07-4.
Setting number
Indoor unit address valid range: 00 to 63
Refrigerant circuit address valid range: 00 to 99
START/STOP button
Transmits address setting
SET TEMP. " " and " " button
Switches the various numbers
Setting number
Indoor unit address valid range: 00 to 63
Refrigerant circuit address valid range: 00 to 99
START/STOP button
Transmits address/function setting
SET TEMP. " " and " " button
Switches the various numbers
", and FAN at the same time for 5 sec-
"Func-
1. System settings