High Static Pressure Duct Type - Fujitsu AJ 126LELDH Series Design & Technical Manual

2-10. High static pressure duct type

Model name
Power supply
Available voltage range
Capacity
Input power
Static pressure range
Standard static pressure
Airflow rate
Fan
Type × Q'ty
Motor output
Sound pressure level*
Heat exchanger type
Air filter
Enclosure
Dimensions
(H × W × D)
Weight
Connection pipe diameter
NOTES:
• Specifications are based on the following conditions:
– Cooling: Indoor temperature of 27 °CDB/19 °CWB, and outdoor temperature of 35 °CDB/24 °CWB.
– Heating: Indoor temperature of 20 °CDB/15 °CWB, and outdoor temperature of 7 °CDB/6 °CWB.
– Pipe length: 7.5 m, Height difference: 0 m. (Between outdoor unit and indoor unit.)
• Protective function might work when using it outside the operation range.
• *: Sound pressure level:
– Measured values in manufacturer's anechoic chamber.
– Because of the surrounding sound environment, the sound levels measured in actual installation conditions might be higher than the specified values here.
2-10. High static pressure duct type
Cooling
Heating
HIGH
MED
m
LOW
HIGH
MED
LOW
Dimensions (H × W × D)
Length
Fin pitch
Rows × Stages
Face area
Pipe type (Material)
Type (Material)
Fin
Surface treatment
Model name
Net material
Material
Color
Net
Gross
Net
Gross
Liquid (Flare)
Gas (Flare)
Drain hose
ARXC036GTEH
kW 11.2
Btu/h 38,200
kW 12.5
Btu/h 42,700
W 207
Pa 0 to 200
Pa
1,990 (553)
3 1,680 (467)
/h (l/s)
1,330 (369)
W 197
42
dB (A) 36
32
mm
2
m
mm
40
kg
45
Ø 15.88 (Ø 5/8)
mm (in)
- (04-21) -
ARXC045GTEH
230 V ~ 50 Hz
198—264 V
12.5
42,700
14.0
47,800
715
100 to 250
100
3,500 (972)
3,000 (833)
2,460 (683)
Sirocco × 2
540
49
45
42
336 × 890 × 53.2
890
1.3
4 × 16
0.30
Grooved H-pin (Copper)
Slit (Aluminum)
Hydrophilic coating
UTD-LF60KA
PP honeycomb
Galvanized sheet iron
—
400 × 1,050 × 500
460 × 1,230 × 640
46
51
Ø 9.52 (Ø 3/8)
Ø 19.05 (Ø 3/4)
VP25
I.D.: Ø 25 (1); O.D.: Ø 32 (1-1/4)
2. Specifications