Led Indicators Of The Button And The Host - BenQ InstaShow VS10 User Manual

9
1
2
3
4
10 Lid of the Host
Alignment hole

LED indicators of the Button and the Host

Please refer to the tables below for detailed indicator and status descriptions for the
Button and the Host.
LED indicator on the Button
Static blue
Flashing blue
Flashing green
Static green
Flashing red
Off
Quick flashing green
Static white
6.
3
8
7
7.
6
5
8.
9.
10. Lid
The device is presenting.
The device is pairing.
• The device is starting up and connecting to the Host.
• The device is downloading the firmware.
The device is in standby mode and working normally.
The device is unable to connect to a Host.
The device is powered off.
The device is upgrading the firmware.
The device is powering up.
WAN port
Allows the following connections:
• Connect the Host to a network for Internet
access.
• Connect the Host to a laptop to access the
Host's web management interface.
DC 2A port
Connect to the supplied adapter extender
power cable and adapter to power the Host.
Power switch
Slide to power on or off the Host.
Standby button with LED indicator
Press to turn the Host on and off.
Refer to Attaching the Host to the ceiling on
page 15 for more information.
Status Description
12